How to become a welder in Alberta (2026)
Welder is compulsory in Alberta: you work as a registered apprentice until you're certified. Three periods of 1,560 hours and 8 weeks of school, a legal pay floor of 60 %, 75 % and 90 %, and union rates from $37.30 to $62.01 an hour. Every step, with sources.
In most provinces you can weld for a living without a trade certificate. Not in Alberta. Welder is a compulsory trade here, so from your first day on the tools you're either a registered apprentice or already certified.
The upside: you're paid while you learn, and the law sets the minimum. Here's every step, from the first application to the B pressure ticket, with what each one costs and pays.
The short version
- Welder is a compulsory trade in Alberta. Only certified welders, registered apprentices and a few other listed groups may do the trade's restricted work: fabricating, servicing and repairing metal structures, pipe, vessels and containers with arc and oxyfuel processes1.
- Three periods, each with 1,560 hours on the job and 8 weeks of school. Each one is designed to take about a year, and each ends with a theory exam2.
- The law sets apprentice pay at no less than 60 %, 75 % and 90 % of the wage of the lowest-paid journeyperson mentor at your employer, in periods 1, 2 and 33.
- In the three Alberta agreements we hold, apprentices start at $37.30 or $43.41 an hour and journeypersons earn $46.94 to $62.01. These rates have been in force since December 2025456.
- The B pressure ticket is a separate step. Third-period apprentices can write ABSA's Grade B exam through their school, but ABSA issues the certificate only once you're a journeyperson7.
Five ways in
| Route | Start here if | What you pay to start | Type |
|---|---|---|---|
| Straight to an employer | You have English 10-2 and Math 10-3, or can pass the entrance exam | $150 application fee, which your employer can pay | Ab initio: no welding school first |
| High school (RAP) | You're 15 or older and in high school | Nothing: the RAP application is free | Ab initio, while you finish school |
| Pre-employment program | You want shop time before you look for an employer | $6,877.50 for 13 weeks at SAIT in 2026/27, plus books | Schooling first, then apprenticeship |
| Trades Qualifier | You've welded for 54 months and 7,020 hours without a certificate | A theory exam, and $160 for the practical exam | Experience route |
| Recognized certificate | You're certified in another province, territory or a listed country | Nothing: you can start work | Already certified |
Sources for each route are in its section below.
Straight to an employer
You don't need welding school before you start. You register with Alberta's Apprenticeship and Industry Training (AIT), an employer sponsors you, and you learn on the job. School comes in 8-week blocks once you're in. That's what "We train you from zero" means on our job board: the employer hires first-period apprentices with no trade schooling.
- Entrance requirements: English 10-2 and Math 10-3, or a GED or CAEC, or AIT's entrance exam28. The exam has 100 multiple-choice questions in math, English and sometimes science, a 3-hour limit and a 70 % pass mark, and costs $1509. Use the study guide: between August 1, 2025 and November 6, 2026, 159 of the 348 welder entrance exams written were passes10.
- A sponsor: an employer, a group of employers, a union or a non-profit that can give you paid work and a journeyperson mentor11. A welder journeyperson can mentor up to 3 apprentices3.
- The application: online, with your Alberta.ca account. The fee is $150, non-refundable, and your sponsor can pay it when it confirms your application, which it has 30 days to do12.
- No employer yet? You can register and attend school as an unsponsored apprentice, but you can't earn on-the-job hours until you have a sponsor. You can change sponsors as often as you need13.
In high school: RAP
Through the Registered Apprenticeship Program, you're a full-time high school student and a registered apprentice at the same time. It's open from age 15 with a parent's consent, after the Workplace Safety Systems course (HCS3000). The employer pays at least minimum wage, you earn one high school credit for every 25 hours on the job (up to 41 credits through RAP), and the hours count toward your apprenticeship14. RAP students can also get a $1,000 or $2,000 high school apprenticeship scholarship15.
Pre-employment program first
Several Alberta schools run welding pre-employment programs built on the first-period curriculum. At SAIT, the program is 13 weeks and $6,877.50 in tuition and fees for 2026/27, plus about $1,000 to $1,500 for books and supplies. Graduates may register as apprentices and challenge the first-period exam; once they pass it and complete their hours with an employer, they start school in period two16.
You pay up front, and jobs that ask for this certificate or a completed period are what we label apprenticeships, not "we train you". Alberta student loans and grants cover designated pre-employment programs; federal apprentice loans don't17.
Experienced, with no certificate: the Trades Qualifier
If you've welded for 54 months and 7,020 hours that employers can verify, you can qualify by passing a theory exam and a practical exam ($160)2. You must plan to live and work in Alberta. Once you've applied, and as long as your application isn't rejected, you can do the trade's restricted work under the supervision of a certified welder; after AIT verifies your experience, you have 18 months to finish181.
Already certified elsewhere
See "Moving to Alberta" below.
The three periods
| Period | On the job | School | What school covers |
|---|---|---|---|
| 1 | 1,560 hours | 8 weeks (240 hours) | Safety, rigging, oxyfuel and arc cutting and gouging, welding symbols and trade math, shielded metal arc (SMAW) fillet welds, and the wire-feed processes (GMAW, FCAW, MCAW, SAW) on mild steel |
| 2 | 1,560 hours | 8 weeks (240 hours) | Metals and distortion, hardfacing, drawings, pattern development, layout and estimating, SMAW groove welds, gas tungsten arc (GTAW) on mild steel, aluminum and stainless, and wire-feed welds on pipe |
| 3 | 1,560 hours | 8 weeks (240 hours) | Codes and Red Seal certification, metallurgy and heat treatment, stainless and nickel alloys, destructive and non-destructive testing, structural, pressure vessel and piping drawings, and SMAW and GTAW on plate and pipe |
Hours from AIT's trade profile; course content from AIT's curriculum guide of August 4, 2026219.
AIT updated the program in August 2026, with a new curriculum and record book10. The rules that matter day to day:
- Each period is designed to take about a year. You're allowed up to 18 months between each requirement2.
- Go to school every year. If you haven't attended in the past year, your registration may be cancelled. You can sign up for your next period from the fourth day of class in the current one20.
- Passing school takes a weighted average of 65 % across all sections, with no section below 50 %. Missing more than 18 hours of class can end your enrolment2019.
- The record book (blue book) is where your hours and skills are signed off. You upload the signed pages to your MyTradesecrets account every year11.
- You can challenge a period without attending school, with your sponsor's recommendation: the exam costs $150 and you need 70 %. You still have to attend at least one period of school, unless AIT credited you for a pre-apprenticeship program2120.
School is offered at Keyano College, Lakeland College, Lethbridge Polytechnic, Medicine Hat College, NAIT, Northern Lakes College, Northwestern Polytechnic, Olds College, Portage College, Red Deer Polytechnic and SAIT. AIT also recognizes programs at the Alberta Pipe Trades College (UA Local 488), the Piping Industry Training School (UA Local 496) and CLAC's Career Development College2.
Exams and the Red Seal
Every period ends with a theory exam; your school gives you the date222. In the final period you can also write the Red Seal exam: 125 multiple-choice questions, with a 70 % pass mark. Welding processes make up 44 % of it, layout and fabrication 22 %, cutting and gouging 18 %, and common occupational skills 16 %232425.
Finish all three periods and you get the Alberta Journeyperson Certificate and an apprenticeship diploma. The Red Seal endorsement is optional, and you can write the exam any time after you're certified. After two failed attempts, you need 40 hours of extra study or upgrading and a training plan before you try again226.
Here's how welders did on AIT's exams between August 1, 2025 and November 6, 202610:
| Exam | Passes | Exams written | Pass rate |
|---|---|---|---|
| Entrance exam | 159 | 348 | 46 % |
| Period 1 theory | 1,600 | 2,341 | 68 % |
| Period 2 theory | 1,159 | 1,372 | 84 % |
| Period 3 theory | 886 | 957 | 93 % |
| Red Seal, apprentices | 361 | 694 | 52 % |
| Red Seal, Trades Qualifier | 79 | 370 | 21 % |
Exams written include supplementary exams. The pass rates are our calculation from AIT's counts.
Period 1 is where the most people stall, and about half the apprentices who write the Red Seal pass it on a given attempt. The exam weightings tell you where to put your study time.
Tickets that aren't the trade certificate
The pressure ticket
To weld on a boiler, a pressure vessel, pressure piping or fittings in Alberta, you need a certificate of competency from ABSA, the province's pressure equipment safety authority, and a performance qualification (PQ) card. The card lists the welding process, base and filler metal, thickness, positions and pipe size you're qualified for2728.
- Grade B is the one welders mean by "B pressure". You can write it as a journeyperson or Red Seal welder (apply on form AB-68 at least 21 days before the test) or as an Alberta third-period apprentice through your school. Apprentices who pass get the certificate and their first PQ card only when they send ABSA their journeyperson certificate. A Grade B certificate doesn't expire, and you can test for more PQs at any authorized testing organization7.
- Grade C is provisional. Your employer applies for it, you can weld only at that employer's work sites, and it lasts up to 24 months. It can't be renewed once you're eligible to write Grade B29.
- ABSA also certifies machine welding operators and pressure tack welders28.
- Fees since November 1, 2026: $214.20 for the Grade B PQ application and test, plus a $78.95 facility and coupon fee; $293.10 for the Grade C test30.
CWB tickets
Welding on certain products, buildings and bridges in Canada must be done by a welder qualified by the CWB Group and working for a CWB-certified company, under the CSA standards (W47.1 and others). You test at your employer, at an accredited test centre, including CWB's own centre in Nisku, or through an accredited union hall. Each test centre sets its own fees.
Most qualifications last two years while you work for a certified company. You can do the check test from 90 days before to 90 days after the expiry date, and if you fail a test you can retake it within 90 days31.
Wire Process Operator
Alberta had a shorter, two-period branch for wire-feed welding only. AIT stopped accepting new Wire Process Operator apprentices and qualifier applications after April 21, 2026, and the branch will be de-designated on January 30, 202710. If you're starting now, register as a welder.
The other provinces' pressure tickets are in our guide to welding tickets across Canada.
What it costs
| Item | Cost |
|---|---|
| AIT application | $150, non-refundable; your sponsor can pay it12 |
| Entrance exam, if you need it | $1509 |
| School at SAIT, per period (2026/27) | $1,613.50: $1,256 in tuition and $357.50 in fees32 |
| All three periods at SAIT | $4,840.5032 |
| Challenge exam | $15021 |
| Trades Qualifier practical exam | $1602 |
| ABSA Grade B test | $214.20, plus a $78.95 facility and coupon fee30 |
Each school sets its own tuition, so check yours. Books, tools and gear are extra. Your employer doesn't have to pay you while you're at school3, which is what Employment Insurance and the loans below are for.
Help paying for it
- Employment Insurance during school. Keep working until the Friday before class starts and get a Record of Employment. Your class registration letter has the reference code Service Canada asks for. You serve the one-week waiting period only once per apprenticeship, and benefits end on the last day of the course3334.
- Alberta student loans and grants for registered apprentices in school. You make no payments and pay no interest while you stay registered, then get a 12-month grace period17.
- Canada Apprentice Loan: up to $4,000 interest-free for each period of technical training in a Red Seal trade35.
- Red Seal Completion Bonus: $5,000 for each Red Seal certification obtained on or after April 1, 202536.
- Scholarships: AIT awards more than 1,900 a year, with no application; you consent to be considered. Apprentice awards are $1,000 or $1,50015.
- Tax: the tradesperson's tools deduction (in 2025, up to $1,000 of what you spent on tools above $1,471), the tuition tax credit, and the labour mobility deduction, up to $4,000 a year for temporary relocation in construction3738.
Pay at each step
The legal floor. Your employer must pay you at least 60 % of the wage of its lowest-paid welder journeyperson mentor in period 1, 75 % in period 2 and 90 % in period 3. The higher rate starts on the day AIT is satisfied you've completed everything to move up a period. The rule doesn't cover time at school or work done in another province3. If the lowest-paid journeyperson earns $50.00 an hour, for example, that's at least $30.00, $37.50 and $45.00.
What the agreements pay. These figures are the employer's own, from its signed union agreement:
| Employer and agreement | Apprentice | Journeyperson | In force |
|---|---|---|---|
| City of Calgary, Calgary Transit (ATU Local 583) | $37.30 at the start of period 1, up to $49.91 in the second half of period 3 | $46.94 to $52.54 | Since December 29, 20254 |
| EPCOR, Edmonton (CUPE Local 30) | $43.41, $49.61 and $55.81 (70 %, 80 % and 90 % of the journeyperson rate) | $62.01 | December 14, 2025 to December 13, 20266 |
| City of Calgary (CUPE Local 37) | Not in our transcription | $47.44 to $52.54 (shop) | Since December 29, 20255 |
At Calgary Transit, the apprentice rate goes up every six months:
| Start of period | After 6 months | |
|---|---|---|
| Period 1 | $37.30 | $39.41 |
| Period 2 | $42.03 | $44.13 |
| Period 3 | $47.29 | $49.91 |
Rates since December 29, 20254.
All three agreements run to the end of 2026, and both apprentice ladders start well above the legal floor. After 2026 Alberta tax, a full-time year (40 hours a week, 52 weeks) at $37.30 an hour leaves $59,086, at $52.54 it leaves $80,910, and at $62.01 it leaves $94,00639. See $37, $52 and $62 an hour in Alberta for the monthly and weekly figures, or work out your own ladder with the apprentice pay calculator.
Where the jobs are
On November 6, 2026, Alberta had 6,706 registered welder apprentices. The biggest groups were registered through AIT's Edmonton office (2,798) and Calgary office (1,490), then Red Deer (569), Grande Prairie (427), Lethbridge (384) and Fort McMurray (229)10.
Our job board lists welding jobs that show their pay, from the employer's posting or its signed union agreement: all welding jobs, every job in Alberta and jobs where they train you from zero. Below this guide we show the welding jobs open right now, in Alberta first when there are any.
How long it really takes
On paper, three years. In practice, longer for most people. Statistics Canada followed the 1,140 welder apprentices who registered in Alberta in 201840:
| Within | Certified |
|---|---|
| 3 years (the program's length) | 9.2 % |
| 4.5 years | 28.6 % |
| 6 years | 37.3 % |
After six years, 50.9 % had left the program and 11.8 % were still in it. Of those certified within six years, the median time was 3.6 years. The median age was 24 at registration and 26 at certification40.
AIT's own count tells the same story: on November 6, 2026, 3,046 welder apprentices were in period 1, 1,582 in period 2 and 1,637 in period 310. What keeps you moving is steady hours with a sponsor, a school seat every year, and passing period 1.
Moving to Alberta
Certified in another province or territory
Alberta recognizes trade certificates from other provinces and territories, with or without a Red Seal. With a recognized certificate, you can work here without registering with AIT, writing an exam or taking more training. An expired certificate still counts if it has a Red Seal, but not without one41.
If you want an Alberta journeyperson certificate (you need one to write the Red Seal exam in Alberta), the Trades Qualifier – Recognized Credential program asks for a theory exam and a $160 practical exam, within 18 months422. Alberta lists the Québec welder certificates it recognizes, CCQ and Emploi-Québec ones included; our French guide covers the move from Québec43.
Moving your apprenticeship
Register in Alberta in the same trade, or your training may not count. Before you leave, have your home authority record all your hours and school, then apply online with your apprenticeship transcripts. Apprentices from Québec's construction sector (CCQ), Manitoba, New Brunswick, Newfoundland and Labrador, the Northwest Territories and Nunavut also send a consent form. AIT checks with your home authority before giving credit44.
Your pressure ticket
ABSA transfers a pressure welder from another province to Grade B without a test if the certification is equivalent: a Red Seal or welder trade certificate, a valid pressure welder certificate from a test that matches Alberta's and was run by that jurisdiction's inspector, and a valid PQ (form AB-129(a)). If it isn't equivalent, you can get a temporary Grade C for up to two years, then you must pass Alberta's Grade B exam729.
From outside Canada
Alberta lists one recognized out-of-country welder credential: the Certificate of Accomplishment in the Boilermakers National Apprenticeship Program from the United States. Canadian Armed Forces Material Technicians at QL5, QL5a, DP2 or higher are also recognized45. With any other credential, the route is the Trades Qualifier – Work Experience program: 54 months and 7,020 hours, a theory exam and a practical exam. You must be a Canadian citizen, a permanent resident or a foreign national legally allowed to work in Alberta, and being accepted into the program isn't a work permit182.
If you went to school outside Canada, you may need to write the entrance exam unless you have an education assessment from IQAS or WES8.
FAQ
Can I weld for pay in Alberta without a ticket? Not the trade's restricted work. You need a trade certificate, a registered apprenticeship or one of the other listed situations, such as welding on your own property for personal use1.
Do I need the Red Seal to work in Alberta? No. The law asks for the journeyperson certificate; the Red Seal is an optional endorsement2. Employers across Canada look for it, and it now comes with a $5,000 completion bonus2636.
How much does a first-year welding apprentice make in Alberta? At least 60 % of the lowest-paid journeyperson mentor's wage at the same employer3. In the agreements we hold, first-period apprentices start at $37.30 or $43.41 an hour46.
Do I get paid while I'm at school? Your employer doesn't have to pay you3. You can collect Employment Insurance, and Alberta and federal apprentice loans are interest-free while you train341735.
What's a B pressure ticket? ABSA's Grade B pressure welder certificate, with a PQ card for each process you're qualified on. It's what lets you weld boilers, pressure vessels and pressure piping. You can write it in period 3, but it's issued once you're a journeyperson7.
Can I get through faster? With your sponsor's recommendation you can challenge a period exam instead of attending school, and a pre-employment program lets you challenge period 1. You must still attend at least one period of school212016.
Does working outside Alberta count? It can. Ask AIT for approval before you start, then send a letter from the out-of-province employer confirming your hours44.
Next steps
- Welder requirements in Alberta at a glance, and in every province
- Welding tickets across Canada: the trade certificate, the Red Seal and the pressure ticket in each province
- Apprentice pay calculator
- Get matched: trade jobs that show their pay
Footnotes
-
Alberta King's Printer, Designated Trades and Restricted Activities Regulation (AR 161/2022), Schedule 2, sections 129 and 130 (current as of May 1, 2026); Government of Alberta, Tradesecrets: Classes of individuals, welder. ↩ ↩2 ↩3
-
Government of Alberta, Tradesecrets: Welder (program requirements, schools, entrance requirements, Trades Qualifier), checked November 18, 2026. ↩ ↩2 ↩3 ↩4 ↩5 ↩6 ↩7 ↩8 ↩9 ↩10 ↩11 ↩12
-
Alberta King's Printer, Apprenticeship Education and Industry Training Programs Regulation (AR 160/2022), section 20, Schedule 1 (wages: welder branch 60, 75 and 90 %) and Schedule 2 (ratio: 3 apprentices to 1 mentor), current as of May 1, 2026. ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
City of Calgary and ATU Local 583, collective agreement 2024–2026, pages 116 and 117 (Apprentice Welder 03230, Journeyperson I Welder 03402), rates effective December 29, 2025. Our transcription: welder pay under this agreement. ↩ ↩2 ↩3 ↩4
-
City of Calgary and CUPE Local 37, collective agreement 2024–2026, page 73 (Schedule B, Welder Journeyperson 1 (Shop)), rates effective December 29, 2025. ↩ ↩2
-
EPCOR and CUPE Local 30, collective agreement 2024–2026, page 58 (Appendix IA, 2026 schedule of wages, December 14, 2025 to December 13, 2026). ↩ ↩2 ↩3
-
ABSA, Grade B Pressure Welder Certificate of Competency. ↩ ↩2 ↩3 ↩4
-
Apprenticeship and Industry Training, Apprenticeship Education Entrance Requirements (September 2026). ↩ ↩2
-
Government of Alberta, Tradesecrets: Entrance exams. ↩ ↩2
-
Apprenticeship and Industry Training, Welder Apprenticeship Program Annual Update 2025-26 (registrations as of November 6, 2026; exam results August 1, 2025 to November 6, 2026; Wire Process Operator de-designation). ↩ ↩2 ↩3 ↩4 ↩5 ↩6
-
Government of Alberta, Tradesecrets: Sponsor an apprentice. ↩ ↩2
-
Government of Alberta, Tradesecrets: Apply for an apprenticeship education program. ↩ ↩2
-
Government of Alberta, Tradesecrets: Sponsorship agreements. ↩
-
Government of Alberta, Tradesecrets: Registered Apprenticeship Program. ↩
-
Government of Alberta, Tradesecrets: Scholarships. ↩ ↩2
-
SAIT, Pre-employment Welding (2026/27 tuition and fees). ↩ ↩2
-
Government of Alberta, Tradesecrets: Student loans and grants for apprentices. ↩ ↩2 ↩3
-
Government of Alberta, Tradesecrets: Trades Qualifier – Work Experience program. ↩ ↩2
-
Apprenticeship and Industry Training, Welder Apprenticeship Education Program Curriculum Guide (August 4, 2026, re-issued September 2026). ↩ ↩2
-
Government of Alberta, Tradesecrets: About classroom instruction. ↩ ↩2 ↩3 ↩4
-
Government of Alberta, Tradesecrets: Challenge exams for registered apprentices. ↩ ↩2 ↩3
-
Government of Alberta, Tradesecrets: How to book an exam. ↩
-
Red Seal Program, Welder: examination weightings. ↩
-
Red Seal Program, Welder: exam information. ↩
-
Red Seal Program, Welder: Red Seal exam self-assessment guide. ↩
-
Government of Alberta, Tradesecrets: Red Seal endorsement. ↩ ↩2
-
Government of Alberta, alis: Pressure welder. ↩
-
ABSA, Pressure welders. ↩ ↩2
-
ABSA, Grade C Pressure Welder Certificate of Competency. ↩ ↩2
-
ABSA, Fee schedule, Schedule H, effective November 1, 2026. ↩ ↩2
-
CWB Group, Welder qualification testing. ↩
-
SAIT, Welder apprenticeship, 2026/27 tuition and fees, effective July 1, 2026. ↩ ↩2
-
Government of Alberta, Tradesecrets: Employment Insurance. ↩
-
Government of Canada, Employment Insurance for apprentices. ↩ ↩2
-
Government of Canada, Canada Apprentice Loan. ↩ ↩2
-
Government of Canada, Red Seal Completion Bonus. ↩ ↩2
-
Canada Revenue Agency, Employed tradespersons, including apprentice mechanics (2025 tax year). ↩
-
Government of Canada, Tax deductions and credits for apprentices and tradespersons. ↩
-
Our calculation with
takeHomeinsrc/lib/take-home.ts: 40 hours a week for 52 weeks, 2026 federal and Alberta tax, CPP and EI, for a single employment income. Union dues and overtime are not included. ↩ -
Statistics Canada, Table 37-10-0193-01: certification, continuation and discontinuation rates of newly registered apprentices, Alberta, welder, 2018 cohort (the latest with six years of follow-up). ↩ ↩2
-
Government of Alberta, Tradesecrets: Canadian credentials. ↩
-
Government of Alberta, Tradesecrets: Trades Qualifier – Recognized Credential program. ↩
-
Government of Alberta, Tradesecrets: Recognized trade certificates (welder, issued in Québec). ↩
-
Government of Alberta, Tradesecrets: Apprentice mobility. ↩ ↩2
-
Apprenticeship and Industry Training, Summary of Recognized Trade Credentials. ↩
Emplois ouverts : soudeur·euse
Welder Journeyperson
Mine Maintenance Welder
Welder
Les nouveaux emplois, chaque lundi
Les nouveaux emplois de métier de la semaine en un courriel, avec le salaire affiché pour chacun. Gratuit, sans compte.

